Monitoring The B-Ras License; Monitoring The Radius Server Algorithm; Monitoring Radius Override Settings; Table 27: Show Radius Override Output Fields - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

JUNOSe 11.1.x Broadband Access Configuration Guide
Related Topics

Monitoring the B-RAS License

Display the B-RAS license.
Purpose
To display the B-RAS license:
Action
host1#show license b-ras
K4bZ16Lr
Related Topics

Monitoring the RADIUS Server Algorithm

Display information about the currently configured RADIUS server algorithm.
Purpose
To display the RADIUS server algorithm:
Action
host1#show radius algorithm
direct
Related Topics

Monitoring RADIUS Override Settings

Display the current RADIUS override settings.
Purpose
To display the RADIUS override settings:
Action
host1:vrXyz7#show radius override
nas-ip-addr: nas-ip-addr
nas-info:
Table 27 on page 144 lists the show radius override command output fields.
Meaning

Table 27: show radius override Output Fields

144
Monitoring the B-RAS License
show ip route
show license b-ras
show radius algorithm
from authentication virtual router
Field Name Field Description
nas-ip-addr Either the NAS-IP-Address [4] attribute is used, or it is overridden
with the Tunnel-Client-Endpoint [66] attribute.