Complete Software Guide for Junos
Defining CoS Classifiers (J-Web Procedure)
Table 415: Classifiers Configuration Fields
Field
Classifier Name
Classifier Type
3206
®
OS for EX Series Ethernet Switches, Release 10.3
Example: Configuring CoS on EX Series Switches on page 3173
Assigning CoS Components to Interfaces (CLI Procedure) on page 3219
Monitoring CoS Classifiers on page 3227
Understanding CoS Classifiers on page 3153
You can use the J-Web interface to define CoS classifiers on an EX Series switch.
Classifiers examine the CoS value or alias of an incoming packet and assign the packet
a level of service by setting its forwarding class and loss priority.
To define CoS classifiers:
Select
>
1.
Configure
Class of Service
NOTE: After you make changes to the configuration in this page, you must
commit the changes immediately for them to take effect. To commit all
changes to the active configuration, select Commit Options > Commit.
See Using the Commit Options to Commit Configuration Changes for
details about all commit options.
Click one:
2.
Add
—Adds a classifier. Enter information into the classifier page as described in
Table 415 on page 3206.
—Modifies an existing classifier. Enter information into the classifier page as
Edit
described in Table 415 on page 3206.
Delete
—Deletes an existing classifier.
Function
Specifies the name for a classifier.
Specifies the type of classifier:
or
.
inet-precedence
>
.
Classifiers
Your Action
To name a classifier, type the name—for
example,
ba-classifier
,
,
Select a value from the list.
dscp
ieee-802.1
.
Copyright © 2010, Juniper Networks, Inc.