Redirect (Captive Portal) - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

group
Use this command to configure a group ID for this captive portal configuration. If a group number
is configured, the user entry (Local or RADIUS) must be configured with the ame name and the
group to authenticate to this captive portal instance. The group ID must be xist first. You can use
the command "user group <1-10>" to create a group ID. The default group ID is 1 for a captive
portal configuration.
Default 1
Format
group <1-10>
Mode Captive Portal Instance mode
no group
Use this command to reset the group number to the default.
Default 1
Format
no group <1-10>
Mode Captive Portal Instance mode

redirect (Captive Portal)

Use this command to enable the redirect mode for a captive portal configuration. Use the "no"
form of this command to disable redirect mode.
Default disable
Format
redirect
Mode Captive Portal Instance mode
no redirect
Use this command to disable redirect mode.
Captive Portal Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
9-8