Ip Address Conflict Commands; Show License; Show License Features; Ip Address-Conflict-Detect Run - NETGEAR ProSafe M7100-24X User Manual

show license

This command displays the license status.
License Date indicates the date of the license. License Status indicates whether license is
active or inactive.
Format
show license
Mode
Privileged EXEC
Example: The following shows example CLI display output for the command.
(Managed Switches) #show license
License date : Apr-9-2010
License copy : 1
License Status: Active
Description : License key is active.
(Managed Switches) #

show license features

This command displays the features that are licensed on the switch
Format
show license features
Mode
Privileged EXEC
Example: The following shows example CLI display output for the command.
(Managed Switches) #show license features
IGMP
MCAST
PIMDM
DVMRP
PIMSM
OSPFV3
IPV6

IP Address Conflict Commands

ip address-conflict-detect run

This command triggers the switch to run active address conflict detection by sending
gratuitous ARP packets for IPv4 addresses on the switch.
ProSafe Managed Switch
Utility Commands
601