Show Ip Dhcp Global Configuration; Show Ip Dhcp Pool Configuration - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
IP address
Hardware
Address
Lease expiration
Type

7.3.5 show ip dhcp global configuration

This command displays address bindings for the specific IP address on the DHCP server.
If no IP address is specified, the bindings corresponding to all the addresses are displayed.
Format
Modes
Service DHCP
Number of Ping
Packets
Conflict Logging
BootP Automatic

7.3.6 show ip dhcp pool configuration

This command displays pool configuration. If
pools is displayed.
Format
Modes
Pool Name
Pool Type
Lease Time
DNS Servers
Default Routers
7-12
The IP address of the client.
The MAC Address or the client identifier.
The lease expiration time of the IP Address assigned to the
client.
The manner in which IP Address was assigned to the client.
show ip dhcp global configuration
Privileged EXEC
User EXEC
The field to display the status of dhcp protocol.
The maximum number of Ping Packets that will be sent to
verify that an ip address id not already assigned.
Shows whether conflict logging is enabled or disabled.
Shows whether BootP for dynamic pools is enabled or dis-
abled.
all
show ip dhcp pool configuration {<name> | all}
Privileged EXEC
User EXEC
The name of the configured pool.
The pool type.
The lease expiration time of the IP Address assigned to the
client.
The list of DNS servers available to the DHCP client
The list of the default routers available to the DHCP client
v4.1, October 2008
is specified, configuration for all the
DHCP Commands