Show Ip Dhcp Binding; Show Ip Dhcp Global Configuration - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

show ip dhcp binding

This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Format
show ip dhcp binding [<address>]
Modes • Privileged EXEC
• User EXEC
Term Definition
IP address The IP address of the client.
Hardware The MAC Address or the client identifier.
Address
Lease expiration The lease expiration time of the IP address assigned to the client.
Type The manner in which IP address was assigned to the client.

show ip dhcp global configuration

This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Format
show ip dhcp global configuration
Modes • Privileged EXEC
• User EXEC
Term Definition
Service DHCP The field to display the status of dhcp protocol.
Number of Ping The maximum number of Ping Packets that will be sent to verify that an ip address id not
Packets
already assigned.
Conflict Logging Shows whether conflict logging is enabled or disabled.
BootP Automatic Shows whether BootP for dynamic pools is enabled or disabled.
Utility Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
9-52