Clear Mac-Addr-Table; Show Running-Config; Terminal Length - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Self
GMRP Learned
Other

18.1.8 clear mac-addr-table

This command clears the dynamically learned MAC addresses of the switch.
Format
Mode

18.1.9 show running-config

Use this command to display/capture the current setting of different protocol packages
supported on the switch. This command displays/captures commands with settings/
configurations that differ from the default value. To display/capture the commands with
settings/configurations that are equal to the default value, include the
The output is displayed in script format, which can be used to configure another switch
with the same configuration. If the optional
extension of ".scr", the output is redirected to a script file.
Format
Mode

18.1.10 terminal length

This command controls the number of lines to be displayed when running the
running-config
Format
Mode
18.1.10.1 terminal no length
This command resets the number of lines displayed when running the
command to the default value (18).
config
Format
Mode
18-16
The value of the corresponding instance is the address of one
of the switch's physical interfaces (the system's own MAC
address).
The value was learned via GMRP and applies to Multicast.
The value of the instance does not fall into one of the other
categories.
clear mac-addr-table
Privileged EXEC
show running-config [all | <scriptname>]
Privileged EXEC
command.
terminal length <1-24>
Privileged EXEC
terminal no length
Privileged EXEC
v1.0, March 2006
is provided with a file name
<scriptname>
System Maintenance Commands
option.
[all]
show
show running-