Show Running-Config; Terminal Length; Show Sysinfo - NETGEAR ProSafe GSM7212 Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

15.1.9 show running-config

Use this command to display/capture the current setting of different protocol packages
supported on the switch. This command displays/captures commands with settings/
configurations that differ from the default value. To display/capture the commands with
settings/configurations that are equal to the default value, include the
The output is displayed in script format, which can be used to configure another switch
with the same configuration. If the optional
extension of ".scr", the output is redirected to a script file.
Format
Mode

15.1.10 terminal length

This command controls the number of lines to be displayed when running the
running-config
Format
Mode
15.1.10.1 terminal no length
This command resets the number of lines displayed when running the
command to the default value (18).
config
Format
Mode

15.1.11 show sysinfo

This command displays switch information.
Format
Mode
Switch
Description
System Name
15-16
show running-config [all | <scriptname>]
Privileged EXEC
command.
terminal length <1-24>
Privileged EXEC
terminal no length
Privileged EXEC
show sysinfo
Privileged EXEC
Text used to identify this switch.
Name used to identify the switch.The factory default is blank.
To configure the system name, see
server" on page
v1.0, March 2006
is provided with a file name
<scriptname>
Section 10.1.1 "snmp-
10-1.
System Maintenance Commands
option.
[all]
show
show running-