Shutdown All - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

Format
shutdown
Mode Interface Config
no shutdown
This command enables a port.
Format
no shutdown
Mode Interface Config

shutdown all

This command disables all ports.
Note: You can use the shutdown all command on physical and port-channel (LAG)
interfaces, but not on VLAN routing interfaces.
Default enabled
Format
shutdown all
Mode Global Config
no shutdown all
This command enables all ports.
Format
no shutdown all
Mode Global Config
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-6