Show Lldp Interface; Show Lldp Statistics - NETGEAR ProSafe M7100-24X User Manual

Term Definition
Re-initialization
The delay before re-initialization, in seconds.
Delay
Notification
How frequently the system sends remote data change notifications, in seconds.
Interval

show lldp interface

Use this command to display a summary of the current LLDP configuration for a specific
interface or for all interfaces.
Format
show lldp interface {<unit/slot/port> | all}
Mode
Privileged Exec
Term Definition
Interface
The interface in a unit/slot/port format.
Link
Shows whether the link is up or down.
Transmit
Shows whether the interface transmits LLDPDUs.
Receive
Shows whether the interface receives LLDPDUs.
Notify
Shows whether the interface sends remote data change notifications.
TLVs
Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can
be 0 (Port Description), 1 (System Name), 2 (System Description), or 3 (System
Capability).
Mgmt
Shows whether the interface transmits system management address information in the
LLDPDUs.

show lldp statistics

Use this command to display the current LLDP traffic and remote table statistics for a specific
interface or for all interfaces.
Format
show lldp statistics {<unit/slot/port> | all}
Mode
Privileged Exec
Term Definition
Last Update
The amount of time since the last update to the remote table in days, hours, minutes, and
seconds.
Total Inserts
Total number of inserts to the remote data table.
Total Deletes
Total number of deletes from the remote data table.
ProSafe Managed Switch
Switching Commands
176