Show Ip Ospf Asbr - NETGEAR GSM7228PS Cli Manual

Term Definition
Area LSA A number representing the Area LSA Checksum for the specified AreaID excluding the
Checksum
external (LS type 5) link-state advertisements.
Import Summary Shows whether to import summary LSAs.
LSAs
OSPF Stub The metric value of the stub area. This field displays only if the area is a configured as a
Metric Value
stub area.
The following OSPF NSSA specific information displays only if the area is configured as an
NSSA:
Term Definition
Import Summary Shows whether to import summary LSAs into the NSSA.
LSAs
Redistribute into Shows whether to redistribute information into the NSSA.
NSSA
Default Shows whether to advertise a default route into the NSSA.
Information
Originate
Default Metric The metric value for the default route advertised into the NSSA.
Default Metric The metric type for the default route advertised into the NSSA.
Type
Translator Role The NSSA translator role of the ABR, which is always or candidate.
Translator The amount of time that an elected translator continues to perform its duties after it
Stability Interval
determines that its translator status has been deposed by another router.
Translator State Shows whether the ABR translator state is disabled, always, or elected.

show ip ospf asbr

This command displays the internal OSPF routing table entries to Autonomous System Boundary
Routers (ASBR). This command takes no options.
Format
show ip ospf asbr
Mode • Privileged EXEC
• User EXEC
Routing Commands
Managed Switch CLI Manual, Release 8.0.3
v1.0, July 2010
4-70