Show Lldp Interface; Show Lldp Statistics - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

18.1.18 show lldp interface

This command displays a summary of the current LLDP configuration for a specific
interface or for all interfaces.
Format
Mode
Interface
Link
Transmit
Receive
Notify
TLVs
Mgmt

18.1.19 show lldp statistics

This command displays the current LLDP traffic and remote table statistics for a specific
interface or for all interfaces.
Format
Mode
Last Update
Total Inserts
Total Deletes
Total Drops
Total Ageouts
The table contains the following column headings:
Interface
LLDP and LLDP-MED Commands
show lldp interface [<unit/slot/port> | all]
Privileged Exec
The interface in a unit/slot/port format.
Shows whether the link is up or down.
Shows whether the interface transmits LLDPDUs.
Shows whether the interface receives LLDPDUs.
Shows whether the interface sends remote data change notifi-
cations.
Shows whether the interface sends optional TLVs in the
LLDPDUs. The TLV codes can be 0 (Port Description), 1
(System Name), 2 (System Description), or 3 (System Capa-
bility).
Shows whether the interface transmits system management
address information in the LLDPDUs.
show lldp statistics [<unit/slot/port> | all]
Privileged Exec
The amount of time since the last update to the remote table
in days, hours, minutes, and seconds.
Total number of inserts to the remote data table.
Total number of deletes from the remote data table.
Total number of times the complete remote data received was
not inserted due to insufficient resources.
Total number of times a complete remote data entry was
deleted because the Time to Live interval expired.
The interface in unit/slot/port format.
v4.1, October 2008
18-5