Novell NETWARE 6-DOCUMENTATION Manual page 2257

Starting ConsoleOne on Linux
24
ConsoleOne User Guide
3
Locate the ConsoleOne installation program (the c1-install file) on the
CD or by downloading it from the Web site as follows:
Source Steps to Locate the c1-install File
CD Change to the ConsoleOne/Linux directory.
Web site 1. Click Management > ConsoleOne for Linux.
2. Follow the instructions on the Web site to download the
ConsoleOne package (the c1linux.tar file).
3. Unpack the file you just downloaded (type tar xf
c1linux.tar at the system prompt).
4. Change to the ConsoleOne/Linux directory that was
created by unpacking the download file.
4
Run the ConsoleOne installation program (type c1-install at the
system prompt).
5
Follow the prompts to complete the installation.
IMPORTANT:
This release of ConsoleOne for Linux has been tested only on the
IBM 1.3 Java runtime environment (JRE). This JRE is included in the ConsoleOne
installation package in case you don't have it. If you do have it and it's already
installed, select No when you are prompted whether to install it.
After ConsoleOne is installed, you can uninstall it at any time by entering the
c1-uninstall command at the system prompt. The c1-install and c1-
uninstall commands can include some optional parameters for running in
unattended mode or installing/uninstalling individual components. For details
on the command syntax, type c1-install -h or c1-uninstall -h at
the system prompt. For a log of ConsoleOne installation or uninstallation
results, see the corresponding log file created in the /var directory.
At the system prompt of a local session or an X terminal (remote) session,
enter the following command:
/usr/ConsoleOne/bin/ConsoleOne
For help with navigating and performing basic tasks in ConsoleOne, see
"Administration Basics" on page
using ConsoleOne, see
29. If you encounter problems starting or
"Troubleshooting" on page 111.