Table of Contents
Advertisement
Appendix D: The Falcon Diagnostic Tool
Adding an MCU to the Network
D-14
To add an MCU to the MCU Network:
1.
Right-click the MCU Network icon, and then click Add MCU.
2.
Alternatively, on the MCU menu, click Add MCU.
3.
The Add MCU dialog box opens.
4.
In the Name box, enter the name of the MCU. Specify a name that clearly
identifies the MCU.
5.
In the IP Address box, enter the IP Address of the MCU. The correct IP
address should be obtained from your network administrator.
Advertisement
Table of Contents
Need help?
Do you have a question about the MGC Administrator and is the answer not in the manual?
Questions and answers