Polycom MGC Administrator Administrator's Manual page 303

changes to Major and an appropriate error message is added to the Faults
log. If the High bit rate Flag is set to NO, the highest line rate that can be
set for the conference is 768 Kbps. The video card that does not support
the High Bit Rate is pulled out from the available resources list and it is
not used to run conferences.
HIGH_VIDEO_FRAME_RATE = YES
•
If set to YES, the flag enables high Video quality (30 frames per second)
for high Line Rates of up to T1/E1 in Transcoding and Continuous
Presence conferences.
If the High Video Frame Rate flag in the system.cfg is set to YES, and
the MCU contains video cards of a version older than 1.43, the MCU
status changes to Major and an appropriate error message is added to the
Faults log. The video card that does not support the High Frame Rate is
pulled out from the available resources list and it is not used to run
conferences.
BONDING_DOWNSPEED = YES
•
This option enables the bonding of channels.
MAX_AUDIO_PLUS_PARTIES_NUMBER_IN_MCU = 0
•
Sets the maximum number of Audio Plus participants in the MCU,
unlimited when set to 0.
• MAX_PARTIES_NUMBER_IN_AUDIO_CONF = 860
The maximum number of participants (default - 860) that can access an
Audio Only conference.
MAX_PARTIES_NUMBER_IN_VIDEO_CONF = 100
•
The maximum number of participants that can access an video
conference. Up to 680 participants are allowed in a video conference,
however this requires 128MB of RAM on the control unit.
AUTO_LAYOUT = YES
•
Enables the usage of the Auto Layout feature.
• CONFERENCE_ID_MCU_LENGTH = 4
Defines the number of digits in the Conference Numeric ID that will be
assigned by the MCU. Possible values are 1 to 16 digits. Enter 0 to
disable the automatic assignment of numeric IDs by the MCU and let the
Operator manually assign them.
MGC Administrator's Guide
5-67