Command Line Launch; Windows Registry Access - Polycom MGC Administrator Administrator's Manual

Command Line Launch

Windows Registry Access

The MGC Manager can be launched by other applications using the
Command Line Instruction.
When accessing the MGC Manager from an external application, the
application must read the ".exe" file name stored in the Windows registry.
After reading the file and version name, the IP address, MCU name, user
login name and password are added.
The Windows Registry uses the following format:
HKEY_LOCAL_MACHINE \ SOFTWARE \ POLYCOM \
MGC_MANAGER \ Versions\VerX.Y
MGC Manager launch format requires the full path and name of the specific
MGC Manager version, including IP, MCU name, User login and password.
For example:
c:\ProgramFiles\MGCManager\OperWS.exe ip=172.22.168.135
MCUname=Alpha12 login=POLYCOM psw=POLYCOM
Spaces (character) are forbidden between the argument name, the '='
character and the version value.
Activate the application and connect. When the MGC Manager window
opens, a single MCU is displayed.
The MGC Manager can be activated using the Windows Start menu as
illustrated in the Run window:
MGC Administrator's Guide
2-31