Support For Mib-Ii Sections; The Mgc-Mib - Polycom MGC Administrator Administrator's Manual

each hardware module, with a conduit to the ACCORD-MIB. This MIB
is responsible for sending status traps indicating when the status of a
component changes.

Support for MIB-II Sections

The following table details the MIB-II sections that are supported in PSOS
and XP:
Table 5-9: Supported MIB-II Sections
Section Object Identifier
system mib-2 1
interfaces mib-2 2
at mib-2 3
ip mib-2 4
icmp mib-2 5
tcp mib-2 6
udp mib-2 7
egp mib-2 8
cmot mib-2 9
transmission mib-2 10
snmp mib-2 11

The MGC-MIB

The MGC-MIB contains a table displaying the updated status of the MCU
and the status of each of the modules. A status trap is sent whenever the status
of a module changes to MAJOR or MINOR.
The first line in the status table relates to the MCMS. The second line relates
to the HDLC. The remaining lines relate to the cards. Each card is identified
by a four digit number. The ENTITY MIB, which contains a description of
each component, can be used to identify the slot to which the number relates.
The status table contains the following data for each component:
MGC Administrator's Guide
Supported In
PSOS and XP
PSOS and XP
(only control unit interface card)
PSOS only
PSOS only
PSOS only
PSOS only
PSOS only
not supported
not supported
not supported
PSOS and XP
5-39