Polycom MGC Administrator Administrator's Manual page 504

Appendix A: Faults
A-8
Table A-4: Card Fault Descriptions (Continued)
Code
_ _ _
VIDEO HIGH BIT RATE
_ _ _
NOT SUPPORTED BY
CARD
_ _ _
VIDEO HIGH FRAME
_ _
RATE NOT SUPPORTED
_
BY CARD
_
YELLOW ALARM
Level Description
_ major When the HIGH BIT RATE flag in the
system.cfg file, FLAGS section is
configured to YES, but the card's
hardware version installed in the system is
too old.
major Video card version is less than 1.24 and in
_ the GENERAL section of the "system.cfg"
_
HIGH VIDEO
YES.
major The local span identified the line but the
PBX failed to identify the local span.
_ _ is configured to
FRAME RATE