Defining An Ip Network Service - Polycom MGC Administrator Administrator's Manual

Version 7.5
Table of Contents

Advertisement

Chapter 3 - Defining Network Services

Defining an IP Network Service

3-52
The IP Network Service defines the properties of the IP network used for
connecting IP endpoints to the conference and the IP cards (installed in the
MCU) to which the network is connected. Several of the network components
are used by both H.323 and SIP endpoints to connect to the conference, and
the same IP card is used for H.323 and SIP connections. Therefore one IP
Network Service can be defined for both H.323 and SIP environments as well
as an H.323-only or a SIP-only network service.
This section covers the following topics:
IP Network Service components ("Appendix E: IP Network
Components" on page E-1)
Defining an IP Network Service (page 3-54)
Assignment of network services to the IP/IP+ card (page 3-93)
Designating the IP Network Service as Default (page 3-97)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MGC Administrator and is the answer not in the manual?

This manual is also suitable for:

Mgc

Table of Contents