Polycom MGC Administrator Administrator's Manual page 320

Chapter 5 - MCU System Management
5-84
duration category there may be redundancies in storage capacity as a
6-second voice prompt will have to be stored under the 8-second
category .
Section VIDEO PLUS Flags
This section describes the flags available with the Video+ board.
• VIDEO_PLUS_YES_NO = YES
YES enables the video+ board.
• COP_SINGLE_LINE_RATE_THRESHOLD = YES
Set to YES to restrict the minimum line rate of the participants joining
the conference on a single port. Participants below this threshold connect
as secondary (i.e., Audio Only). Otherwise there is no limitation on the
line rate to join the Conference On Port.
The threshold values are taken from a hard-coded table within the
MCMS:
Rate
1920-1472
768
512
384-192
128-64
COP_SINGLE_ENABLE_QCIF = NO
•
Set to YES to allow participants with QCIF only capabilities to join the
conference on a single port.
ENABLE_CLICK_AND_VIEW_SPLASH = YES
•
Set to YES to enable the splash screen to be displayed after connecting to
an enabled Click & View conference.
• PARTY_NAME_ALWAYS_ON = NO
Flag must be set to YES, when requiring the display of participant's
names during a conference.
DISPLAY_PARTY_NAME = YES
•
When the flag is set to YES, enables the display of participant names
during a conference. During Conference Properties - Settings definition
Threshold
768
384
256
128
0