Fault Category - Reservation - Polycom MGC Administrator Administrator's Manual

Fault Category - Reservation

version.txt
•
system.cfg
•
These files cannot be created automatically. To create these two files, use the
Restore Configuration option from the MCU Utils menu (from the MCU
right click menu).
If you did not backup the configuration files, you may install these files from
the installation disk. You may need to reconfigure some of the settings after
this operation.
If the problem persists, consult your service engineer.
For more information on backing up and restoring files, see Chapter 5, MCU
Utilities.
Reservation Faults are errors that occur if the system reboots while there are
still reserved conferences that have not begun when the system was last shut
down.
Table A-3: Reservation Fault Descriptions
Code
_ _
CONFERENCE HAS NO
_
SUFFICIENT RESOURCES
_ _ _ _
END TIME OF ON GOING
_ _
CONF IS OVER
_ _ _
END TIME OF RESERVED
_ _
CONFER IS OVER
Level
_ minor
_ minor
_ minor
MGC Administrator's Guide
Description
If during an On Going Conference
the MCU is reset, and then there
are insufficient resources for the
conference to continue.
This situation can occur when a
card is removed.
The end time of the On Going
Conference has passed. In this
case, the conference is deleted
from the On Going Conferences
list.
The end time of the reserved
conference has passed. In this
case, the conference is deleted
from the reservations list.
A-3