Deleting An Operator - Polycom MGC Administrator Administrator's Manual

Deleting an Operator

1. Double-click the Operators icon or click on the plus [+] icon next to the
Connections icon.
A list of participants appears below the Operators icon. All operators
currently connected to this MCU appear in the list.
2. Right-click the name of the operator to be deleted, and then click Delete.
The system displays a confirmation message.
3. Select Yes to confirm or No to cancel the operation.
If you select yes, the operator name and icon are removed from the
system.
To delete an operator, you must be a Superuser operator.
MGC Administrator's Guide
6-5