Creating The Welcome Video Slide; Converting The Image Into A *Raw Image File - Polycom MGC Administrator Administrator's Manual

Creating the Welcome Video Slide

Converting the Image into a *raw Image File

The video slide is a still picture that can be created in any graphic application
such as Photoshop, CorelDraw, Paint Shop Pro etc., or any video frame
captured using the appropriate application. This picture is then converted into
a RAW format file, which is the only format identified by the MGC converter.
The picture conversion is done in the Jasc Paint Shop Pro or Adobe
Photoshop applications.
The video converter tool is based on a clip from a single slide that uses the
H.261 standard. The video clip can be viewed by both low-level endpoints,
and high-level endpoints with line rates higher than 768Kbps.
The *raw file size should not exceed 352 pixels in the width and 288 pixels in the
height, or a file size of 297K.
1. Open the image in the Jasc Paint Shop Pro application or Adobe
Photoshop. This procedure describes the creation of a *raw file in Jasc
Paint Shop Pro application.
2. On the Image menu, click Resize.
The Resize dialog box opens.
MGC Administrator's Guide
8-9