Polycom MGC Administrator Administrator's Manual page 387

3. In the Indications table, double-click the event for which you want to
update parameters. Alternatively, select the entry and then click Edit
Current Selection button.
The Update Parameters for <Event> Indication dialog box opens.
4. Click the Show Indication Log check box to enable the Indication for
the requested event. When enabled, each time the event occurs the
system automatically opens the Indications Log window on top of all
other windows, enabling you to view all the events that are recorded to
the log file.
5. To play the indication repeatedly (until stopped by the operator), select
the Enable Repeat check box.
6. In the Voice Type drop down list, select one of the following options:
• None - to indicate that no audible alarm will be played and the event
will only be recorded to the log file. If this option is selected, the
Wave File and Text-To-Speech fields are disabled.
• Wave File - to play a wave file when the event occurs. The wave
file is selected in the Wave File field. If you select this option, the
Wave File field is enabled and the Text-To-Speech field is disabled.
• Text to Speech - to translate the text that you enter in the Text-To-
Speech field into voice according to the translation parameters
configured in the Text-to-speech utility parameters. If you select this
option, the Text-To-Speech field is enabled and the Wave File field is
disabled.
MGC Administrator's Guide
5-151