Setting The Default Ip Network Service - Polycom MGC Administrator Administrator's Manual

Chapter 3 - Defining Network Services

Setting the Default IP Network Service

3-98
When defining participants, the default Network Service is assigned to the
participant according to the participant's connection type, unless you
explicitly assign a different one.
With IP Network Services, you can define one IP Network Service as default
for H.323 connections and another Network Service as default for SIP
connections. If the IP Network Service supports both H.323 and SIP
connections, you can set the same Network Service as default for both H.323
and SIP, or for H.323-only or for SIP-only.
To designate an IP Network Service as the default IP Network Service:
1. In the Browser pane, connect to the MCU and expand its tree.
2. Expand the MCU Configuration tree.
3. Expand the Network Services tree.
4. Expand the IP Network Services tree.
5. Right-click the IP Network Service to be set as the default, and then click
Set As H.323 Default, or Set As SIP Default.
The next time you access this menu, a check mark is added next to the
network service type to indicate its selection as default.
To set this IP Network Service for both H.323 and SIP connections,
repeat step 5 and select the option you need.