Table of Contents
Advertisement
Chapter 5 - MCU System Management
5-156
If you have selected the Browse button, the Open dialog box appears.
Use Windows conventions to select the appropriate wave file.
19. If the Text-to-speech option is selected in the Voice Type, in the Text-To-
Speech field enter the text that will be used as this MCU indicator and
translated into voice when the event occurs on this MCU.
20. To play (preview) either the wave file or the text translated into voice,
click the Play button next to the Voice Type field.
21. Click OK to complete the MCU Indication definition and the return to
the Configure Indications–MCU dialog box.
The MCUs table is updated accordingly.
22. Repeat steps 15 to 21 to define indications for additional MCUs.
23. In the Play MCU Audio Indication drop-down list, select whether the
MCU indication will be played Before the Event indication or After the
Event indication. The indication that will be played is composed of two
parts: The MCU indication + The Event indication.
This selection applies to all the listed MCUs. For example, if the Play
MCU Audio Indication option is set to Before Event, the voice-to-speech
option is selected in the Voice type and you have entered the name of the
MCU (such as Demo MCU) as text, the system will play "Demo MCU"
first and then will play the Event Indication
To configure the voice parameters, speed and other options for the text-to-speech
translation, click the Configure Text To Speech button to open the Speech
Properties dialog box. Refer to Windows documentation or on-line help for
additional information.
24. Click Close to complete the Event indications configuration.
.
Advertisement
Table of Contents
Need help?
Do you have a question about the MGC Administrator and is the answer not in the manual?
Questions and answers