Polycom MGC Administrator Administrator's Manual page 461

Table 7-7: Address Book - Endpoint Definition Options (Continued)
Field
Endpoint
Characteristics
Description
Describes the endpoint capabilities. This is especially
important when importing the endpoint information
from the database. These four fields appear in the
Gateway Profile, the system will conduct the session
according to the highest possible common
denominator between the endpoint and the profile.
Line Rate - Select the multimedia (audio, video or
data) transfer rate in Kbps for the gateway session.
Maximum line rate currently supported is E1 (1920
Kbps). For example, if the endpoint maximum Line
rate is set to 384, while the Gateway Profile is set to
128 Kbps, the session will use 128 Kbps as the
session Line rate.
Audio Only - Select this check box if the gateway
session should be run using audio only (without
Video). When cleared, video can be used during the
conference.
Restrict Only - Select this check box if one of the
participants is using restricted endpoint. The line rate
for each channel of restricted lines is 56 Kbps instead
of 64 Kbps.
Encryption - Select this check box if encryption is to
be used.
MGC Administrator's Guide
7-53