Polycom MGC Administrator Administrator's Manual page 311

IP_BOARD_PARAMETERS
Section
H245_TUNNELING = NO
•
Enables H.245 tunneling.
JITTER_BUF_SIZE = 2
•
The size of the minimum Jitter Buffer in 10 msec increments.
The possible values are 2-8 (20-80msecs).
SIP_NORTEL = NO
•
This flag enables/disables specific changes done for the Nortel
environment. (YES for Nortel Environment)
• SIP_VIDEO_DRAFT = 5
The SIP Video draft version. '5' is the newer one. (3 for Nortel
Environment)
SIP_CAP_DTMF_BY_INFO = NO
•
If YES, offer signaling DTMF in SDP.
FILTER_MEDIA_BY_IP = YES
•
If set to YES, we drop packets that don't come from the address specified
when the channel was opened. For Cisco this flag should be set to NO.
IP_3G_FLAGS
Section
• ENABLE_H323_PSTN = NO
YES - Enable Ericsson 3G support
NO - Disable Ericsson 3G support
USE_ISDN_NUMBER_FOR_H323_DIALING = NO
•
YES - Uses an ISDN number for H.323 dialing.
NO - An ISDN number is not used for H.323 dialing.
H323_MOBILE_PHONE_RATE = 0
•
Available values 0 - 128.
52 is for Ericsson only.
• SEARCH_FOR_H323_DEFINED_PARTY = YES
YES - Enables an MCU search for define participant.
NO - The MCU does not search for defined participant.
MGC Administrator's Guide
5-75