Polycom MGC Administrator Administrator's Manual page 122

Version 7.5
Table of Contents

Advertisement

Chapter 3 - Defining Network Services
3-72
Table 3-19: H.323 Dialog Box Parameters (Continued)
Field
Prefix (cont')
Refresh H.323
Registrations Every
n Seconds
Table 3-20: Gatekeeper Interoperability
Gatekeeper Modes/
Types
Radvision MGK-100
Radvision ECS
VCON MXM
Cisco MCM
PathNavigator
Shading indicates the preferred configuration mode
Description
Notes:
When PathNavigator is used, this prefix
automatically registers with the gatekeeper. When
another gatekeeper is used, this prefix must also
be defined in the gatekeeper.
When a firewall is used, two IP Network Services
are usually defined; one for the card that is
connected to the external network and the other
one that includes all the remaining cards (those
connected to the internal network).
Enter the frequency in which the system informs the
gatekeeper that it is active by re-sending the IP
address and aliases of the IP cards to the
gatekeeper. (The conference details are not
registered.) If the IP card does not register within the
defined time interval, the gatekeeper will not refer
calls to this IP card until it re-registers. If timeout is
set to 0, re-registration is disabled.
Note: It is recommended to use default settings.
Board
Basic
Hunting
+
+
+
+
+
+
-
-
+
+
Pseudo
Register as
Gatekeeper
Gateway
+
+
+
+
+
+
-
+
+
+

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MGC Administrator and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Mgc

Table of Contents