Viewing The Data Module Specific Properties - Polycom MGC Administrator Administrator's Manual

Viewing the Data Module Specific Properties

The data module contains one bridge and three units. There are two types of
data cards: T.120 standard and T.120-24. The following table describes the
number of ports supported by each unit on the card and the total number of
participants supported by each card type.
Table 4-11: T.120 Card Types
Card Type
T.120 standard
T.120-24
This also limits the number of conferences that can be handled by the data
module. Up to 12 (24) conferences of one participant, one conference of 12
(24) participants, or any combination of number of conferences times the
number of participants per conference, up to 12 (24) can be handled by the
data module. The Data Bridge determines the participants to be handled by
each unit and the number of simultaneous conferences to be handled by the
data module.
To view the Data module units:
To list the Data module's units in the Browser pane, click the plus icon [+]
next to the card icon.
To display the module's units in the Status pane, click the card icon.
A list of the Data ports appears below the slot icon and in the Status pane.
Number of ports
supported by each unit
4
8
MGC Administrator's Guide
Total number of
participants
12
24
4-47