Status Trap Content
The MCU can be set to send status traps only for specific statuses. The trap
content can be set to:
NEVER - A trap is never sent
•
MAJOR - A trap is sent only when the card/MCU status is MAJOR
•
MINOR - A trap is sent when the card/MCU status is MINOR or
•
MAJOR
The default content is MINOR. The trap content is defined in the
"system.cfg" file in the SNMP section.
Status Trap Timer
The MCU can be set to send the status trap according to a time interval. The
default time interval for sending the trap is 60 seconds. The MCU will
continue sending the trap as long as the status has not changed. Selecting a
time interval of 0 will cause the trap to be sent only once. The time interval is
defined in the "system.cfg" file in the SNMP section.
MGC Administrator's Guide
5-43