Table of Contents
Advertisement
Chapter 7 - Configuring the Gateway
•
Describes the various routing methods and provides step-by-step
instructions for configuring the gateway.
Chapter 8 - Audio and Video Conversion Tools
•
Describes how to use the Greet and Guide tools to create audio messages
and video slides and how to convert them into the MGC format.
•
Appendix A - Faults
Lists the fault codes and their descriptions.
•
Appendix B - PPP Setup
Describes how to establish TCP/IP communication between the MGC
Manager and the MCU via a telephone line, modem or serial connection.
Appendix C - Performance Monitoring Net-T1/Net-E1
•
Describes how to monitor the performance of the ISDN lines connected
to the Net-T1/Net-E1.
Appendix D - The Falcon Diagnostic Tool
•
Describes how to use the Falcon diagnostic tool which is an add-on to the
MGC application that enables you to run diagnostic tests on the hardware
and software of the MGC-25, MGC-50 and the MGC-100 units.
MGC Administrator's Guide
1-3
Advertisement
Table of Contents
Need help?
Do you have a question about the MGC Administrator and is the answer not in the manual?