Polycom MGC Administrator Administrator's Manual page 554

Appendix D: The Falcon Diagnostic Tool
D-12
Test Results Pane
As the tests are run, the results are displayed in the Test Results table. A log
report is written containing these results.
The test categories depend on what tests are run. When the MCU icon is
selected in the Browser pane, two categories are displayed: Card and Status.
When the cards or units are selected, there are five categories displayed in this
window:
Table D-4: Test Selection Categories and Descriptions
Field
Card
Unit
Test
Status
Time Left
When you click on a test result (a row) in the summary table, the test details
are displayed in the Details box.
The two buttons below the Details box determine how the test results are
saved in the log report.
Save Details - Saves the details as they appear in the Details box.
Save Summary - Saves the table in the Tests Results pane to the Falcon Logs
folder. The log is named using the MCU name, Slot ID, Card name, Unit,
Processor and Word summary.
Description
Displays the name of the card and its serial number.
Identifies the unit on the card.
Identifies the test.
Describes whether or not the test was completed, if
it timed out, whether the test passed or failed.
Lists the time left to run on the test.