Viewing The Common Card Parameters - Polycom MGC Administrator Administrator's Manual

Chapter 4 - MCU Card Management

Viewing the Common Card Parameters

4-10
Table 4-2: MCU's Cards Status Columns (Continued)
Field
Faulty Units
Disabled Units
Num Units
When the MCU is updated with a new software version, the current card
configuration definitions are automatically copied to the new configuration files
and are loaded to the card during the software download process.
You may want to view the cards parameters, disable one or more of the card's
units, or modify the cards configuration.
To view any card parameters:
Right-click the slot containing the card to check or configure, and then click
Properties.
Description
Indicates if there are units on the card which are
faulty and the sequential number of the faulty unit.
Indicates the units that were disabled by the operator.
Indicates the total number of units available for each
module.