Appendix B: Ppp Setup - Polycom MGC Administrator Administrator's Manual

Appendix B: PPP Setup

B-2
Following are two examples of ppp.cfg files setup:
1. Open the Notepad application.
[COMM2]
CON_TYPE=MODEM
2. Type in the text as described in the following table depending on the type
of PPP connection you are using.
[COMM3]
CON_TYPE=DIRECT
In the example shown above, the ppp.cfg file contains the setup for COMM 2
to Modem connection.
In the second example, the ppp.cfg file contains setting for COMM 3 to
Direct connection.
Before configuring the PPP to a COMM port, you have to check that no other
device is configured to use the same port.
Following is the list of sections in the configuration file and their parameters.