Polycom MGC Administrator Administrator's Manual page 391

The Update Indication Parameters for MCU <MCU name> dialog box
opens.
16. Click the Enable Indications check box to enable the event Indications
set for the selected MCU.
17. To add an MCU specific indication before or after the event indication,
in the Voice Type drop down list, select one of the following options:
• None - No MCU-specific audio indication will be played when an
event occurs on this MCU. If this option is selected, the Wave File
and Text-To-Speech fields are disabled.
• Wave File - To play a wave file as an MCU indicator when the
event occurs on this MCU. The wave file is selected in the Wave
File field. If you select this option, the Wave File field is enabled
and the Text-To-Speech field is disabled.
• Text To Speech - To translate the text that you enter in the Text-To-
Speech field into voice as an MCU indicator according to the
translation parameters configured in the Text-to-speech utility
parameters. If you select this option, the Text-To-Speech field is
enabled and the Wave File field is disabled.
18. If the Wave File option is selected in the Voice Type, select the wave file
that will be played as this MCU indicator when the event occurs on this
MCU. Either enter the path and name of the wave file to be used in the
Wave File field, or click the Browse button to select the file from the list.
MGC Administrator's Guide
5-155