Table of Contents
Advertisement
Chapter 2 - Software Installation
Modifying the MCU Local Time for Daylight Savings
2-20
To set the time on the MCU automatically, using the MGC Manager time
settings:
1.
Click the Get Oper Time&GMT button or Get Oper Time button.
2.
Click OK.
To set the time on the MCU Manually:
1.
In the MCU GMT Time box, enter the appropriate MCU GMT time by
either clicking on the scroll arrows to change the value, or retyping the
new value.
2.
Set the MCU GMT Offset (hours), by clicking the scroll arrows to change
the value, or retyping the new value.
3.
Click OK.
To modify the MCU Local Time for daylight savings:
1.
In the MCU Time dialog box, change the MCU GMT Offset.
The MCU local time will be changed accordingly. For example, if the
Local MCU Time shows 11:00 and the MCU GMT Offset is set to 2,
changing the MCU GMT Offset to 1 will change the MCU Local Time to
10:00. The MCU GMT Time will remain unchanged.
2.
Click OK.
Advertisement
Table of Contents
Need help?
Do you have a question about the MGC Administrator and is the answer not in the manual?