Setting The Default Network Service - Polycom MGC Administrator Administrator's Manual

Setting the Default Network Service

Whenever a new conference is configured, the default network service is
assigned to the conference unless you explicitly assign a different one. This
section describes how to set the default network service for an MCU.
For instructions on setting the default IP network service see "Setting the Default
IP Network Service" on page 3-97.
To make a Network Service the default:
1. In the Browser pane, connect to the MCU and expand its tree.
2. Double-click the MCU Configuration icon.
3. Double-click the Network Services icon to expand the list of network
services types.
4. Double-click the ISDN/T1-CAS/ATM/MPI Network Service icon to
expand the list of network services.
5. Right-click the icon of the Network Service to be set as the default, and
then click Set As Default.
The name of the network service appears in bold to indicate that it is the
default Network Service for that type.
You may define a default Network Service for each Network Service type (ISDN,
T1-CAS, ATM, or MPI).
MGC Administrator's Guide
3-131