Assigning The Mpi Network Service To The Mpi Network Interface; Module - Polycom MGC Administrator Administrator's Manual

Chapter 3 - Defining Network Services
Assigning the MPI Network Service to the MPI Network
Interface Module
3-110
To enable the connection between the MGC unit and DCE, you must assign
the MPI network service to the appropriate span of the MPI Network interface

module.

For information about clocking in a serial-only environment (no ISDN), see
"Clocking in Serial Environment" on page 5-135.
To assign the Network Service to the MPI Network Interface module:
1. In the Browser pane, right-click the slot containing the MPI card and
then click Properties.
Alternatively, double-click the slot containing the MPI card.