Polycom MGC Administrator Administrator's Manual page 159

Table 3-32: New MPI Span Dialog Box Options (Continued)
Field
Participant Name
12. Click OK to confirm your settings.
You are returned to the Span dialog box and the new span definition is
added to the Spans table.
13. Repeat steps 10 to 12 to define additional spans.
To delete a span from the table, highlight the span to delete and click the
Minus button.
A confirmation dialog box is displayed.
Select Yes to confirm or No to cancel.
14. Click Finish to complete the MPI Network Service definition.
The new MPI Network Service is added to the MPI Network Services list
in the Browser pane.
To set up an MPI Network service as the default or to modify the Network Service
parameters, follow the procedure described for all other Network Services. For
details, see "Modifying a Network Service" on page 3-124 and "Defining a New
MPI Network Service" on page 3-101.
Description
When using a leased line, type the participant's
name, so that the MCU can identify the endpoint.
Note: The Participant Name box is only enabled
when the Dialing Mode is set to Leased in the
Settings dialog box.
MGC Administrator's Guide
3-109