Endpoint Over An H.320 Backbone To H.323 Endpoint, Using Destinations - Polycom MGC Administrator Administrator's Manual

Step 3. The remote gateway uses the Address Book to find the H.323 phone
number 8000 as defined in the Remote Gateway Definition. Using
the Dial string the remote gateway finds the entry and dials 8000 the
destination endpoint.
H.323 Endpoint Over an H.320 Backbone to H.323 Endpoint,
Using Destinations
In this method, the destination endpoint number and the gateway session
configuration details are transferred to the gateway in the dialed number.
The H.323 endpoint connects using the following string: [local GW prefix,
first GW Link ID]*, for example, 7011*.
Figure 7-21: IP-to-IP Over H.320 Backbone Call Flow Using Destinations
Step 1. The H.323 endpoint dials 7011* representing the gateway prefix, the
Gateways Link ID and the Delimiter.
The digits 70 represent the local gateway prefix defined in the
Network Service Properties and 11 is the local Gateway Link ID
retrieved from the Gateway Link.
In this method, endpoint details are transferred to the gateway which
includes a conversion table in which each E.164 ID number is
assigned a destination alias. Endpoint details are transferred to the
MGC Administrator's Guide
7-29