Handling The Performance Monitoring Errors - Polycom MGC Administrator Administrator's Manual

Appendix C: Performance Monitoring NET-T1/Net-E1

Handling the Performance Monitoring Errors

C-8
Table C-1: Performance Monitoring Options (Continued)
Error Condition
Line Code Violation
(LCV)
If Line Code Violation errors are indicated, make sure that the Line Coding
option selected in the Network Service properties is identical to the actual
Line Coding used by the service provider. If necessary, contact the service
provider for further information.
If Path Code Violation errors occur, make sure that the network line is
properly connected to the MCU and that the network cable is firmly inserted
into the 8-pin RJ45 connector. Ask the service provider to check the
connectivity of the line to the switch at the far end.
If there are many CSS errors this may indicate a synchronization problem as a
result of no clock signal. Check the clock configuration of the network cards.
Description
See detailed explanation above.