Polycom MGC Administrator Administrator's Manual page 309

IP_ENABLE_BACKGROUND_COLOR = NO
•
Set to YES, when using Background Colors in a Continuous Presence
Video conference.
ENABLE_IP_SLIDE = YES
•
When set to YES, H.323 participants can view the video Welcome slide
when connecting to an IVR-enabled conference. SIP participants cannot
view the Welcome slide.
• IP_PACKETS_FRACTION_LOST = NO
For future development.
• H323_INTERLACE_MODE = YES
When set to YES, enables Pro-Motion in H.323.
RFC2833_DTMF = YES
•
YES - Enables the use of RFC2833.
NO - Disables the use of RFC2833.
Section SIP
SIP_ENABLE_264_FIXED = NO
•
In VSW 264 resolution in SIP environment that doesn't support highest
common this flag should be NO.
• SIP_REINVITE = YES
YES - Only send one algorithm for each media, 1 for audio and 1 for
video is sent.
NO - All the mcu capabilities for each media is sent.
SIP_FAST_UPDATE_INTERVAL = 0
•
0 = Disables the MCMS fast update requests.
If not 0 = The interval in seconds between two fast update requests. If the
endpoint does not request one, the MCMS initiates a request instead of
the endpoint and sends it to the video card.
• SIP_MSG_TIMEOUT = 120
The value can be 120 and above (120 is the minimum). This value is the
time (in seconds) that the MCU will wait for a SIP message before the
timer deactivates.
MGC Administrator's Guide
5-73