Polycom MGC Administrator Administrator's Manual page 452

Chapter 7 - Configuring the Gateway
7-44
The To H.320 Session Profile Definition dialog box opens.
4. Define the following parameters:
Table 7-5: To H.320 Session Profile Definition Options
Field
Session Profile
Name
Session Profile ID
(E.164)
H.320 Network
Service
H.320 Sub-Service
Description
A name assigned to the Session Profile to identify it
in the To H.320 Session Profiles list. The name is not
used to handle calls.
Enter the Session Profile ID in E.164 format (digits
only). Currently, the ID is defined using up to two
digits. If the call originates from H.323, using this
profile ID, the endpoint enters this ID to indicate how
the call is handled by the gateway. In such a case,
the parameters defined for this profile will be used to
handle the call gateway session.
Select from the drop-down list the Network Service to
handle the call to the destination endpoint. The
default H. 320 Network Service is automatically
listed.
Select from the drop-down list the name of the H.320
Sub-Service. This field lists the default Sub-Service
defined for the selected Network Service. Leave
blank if no Sub-Service is to be used.