Spans And Phones Dialog Box - Polycom MGC Administrator Administrator's Manual

Spans and Phones Dialog Box

12. Click Next to continue.
The Spans and Phones dialog box opens.
This dialog box is used to assign circuit identification numbers and the dial-in
phone number ranges to be used in dial-in conferences. Circuit orders are
automatically assigned to spans. The dial-in phone numbers are allocated to
the MCU by your service provider (carrier) and should be obtained from the
service provider. You specify the range of dial-in numbers in the Spans and
Phones dialog box by entering the first and last numbers in the range. You can
define several ranges for the same span.
To define
a span
The number used
to identify the
MCU
To remove a
To define a dial-in phone
span
numbers range
MGC Administrator's Guide
To delete a
currently
defined dial-in
numbers range
To allocate dial-
in numbers for
Gateway calls
To delete
allocated dial-in
numbers for
Gateway calls
List of dial-in
phone numbers
and their
ranges
allocated to the
Gateway
3-15