Windows 2000 - Advanced Network Settings - Polycom MGC Administrator Administrator's Manual

9. Enter the name of the network connection and click Finish.
Select any given name for your network.
In the previous dialog box, Completing the Network Connection Wizard the
network has been given an arbitrary name: MCU Connection. This name
designation is used in the Windows 2000 - Advanced Network Settings.
A new icon appears with the named MCU Connection.

Windows 2000 - Advanced Network Settings

Establish a new dialup connection by using the following dial-up connection
parameters (Properties):
In the Server Type window, select the PPP Windows 95/98/NT4/
•
Windows 2000, Internet and check only the Enter the Network and the
TCP/IP options.
In the TCP/IP definitions window, enter only the Operator's IP address.
•
Select the Server Assigned Name server address (you don't need to
specify the MCU IP address). Check the options (IP compression and
Use default gateway).
In order to activate the connection, double-click the Dial-Up-Networking
icon created previously, enter the User name, Password and the Phone
number, and then select Dial. As soon as the connection is established, the
MGC Manager software can run and communicate with the MCU.
MGC Administrator's Guide
B-19