Polycom MGC Administrator Administrator's Manual page 268

Chapter 5 - MCU System Management
5-32
An MCU can be configured to automatically begin a trace. Once the IP
terminal is connected, the MCU activity is recorded and displayed on the
screen. You can capture and save this information to a LOG file. Only
information that was displayed after the creation of the LOG file will be
saved in the file. All other information will be lost.
2. To create a new Log file, on the File menu, click Open Log File, or click
the Open Log File icon
The Select a LOG File to Open dialog box opens.
3. In the Look in box, select a folder to which you wish to assign the log
file.
Use standard Windows procedure to open a folder.
4. In the File name box, enter the name of the file you wish to create.
5. Click Open.
You are returned to the Donkey-COM window, which displays the
selected file name in the title bar.
This operation activates the capturing utility, which saves all the events
that occur internally in the MCU to the LOG file. Once activated, the
capturing utility remains active until you save the LOG file.
on the toolbar.