Defining The Gateway Range - Polycom MGC Administrator Administrator's Manual

The dialog box closes. You are returned to the Spans and Phones
dialog box. The number range appears in the Dial-In Phone
Numbers list.
e. Repeat steps a-d for each number range you need to enter.
To delete a dial-in number entry:
In the Dial In Phone Number section, click the entry to delete and then
•
click the Minus
Click Yes when prompted to confirm the deletion.
•
The entry is deleted.
Sorting the dial-in number list:
You can change the order in which dial-in phone number entries are displayed
by doing the following:
• Click the First Number heading to sort the list in ascending order
according to the First Number value of the entries.
Click the Last Number heading to sort the list in ascending order
•
according to the Last Number value of the entries.

Defining the Gateway Range

16. The dial-in numbers to be used for Gateway connections are allocated to
the MCU by your service providers. The range of dial-in numbers
allocated to Gateway calls must differ from the dial-in number ranges
allocated to multipoint conferencing. To define the Gateway dial-in
numbers range:
a. In the Spans and Phones dialog box, in the Gateway Range section,
click the Plus
The Gateway Phone Numbers dialog box opens.
button.
button.
MGC Administrator's Guide
3-19