Disconnecting From The Falcon Diagnostic Tool - Polycom MGC Administrator Administrator's Manual

Appendix D: The Falcon Diagnostic Tool

Disconnecting from the Falcon Diagnostic Tool

D-22
To set the Log file path:
1. In the Log menu, click Set Log File Path.
A browser opens to set the log file path.
2. Select the Folder to store the log files and click OK.
To filter the log file to list only the test faults:
In the Log menu, click Only Faults.
•
Disconnecting from the Falcon diagnostic tool resets the MCU and puts it
back into Normal mode. If the MCU is not connecting properly in the MGC
Manager Application, this option is a good way to restore the connection.
This is also the recommended way to close the Falcon tool.