Polycom MGC Administrator Administrator's Manual page 312

Chapter 5 - MCU System Management
5-76
Section IP_AUDIO
G729 = NO
•
When set to YES, enables G729 audio algorithm.
G722 = YES
•
When set to YES, enables G.722 in H.323.
G728 = YES
•
When set to YES, enables G.728 in H.323.
• G7231 = YES
When set to YES, enables G.723.1 in H.323. Requires Audio card H/W
Version 4.0 or higher, or the Audio+ card.
G722_1 = YES
•
When set to YES, enables G.722.1 in H.323. Requires Audio card H/W
Version 4.0 or higher, or the Audio+ card.
SIREN14 = NO
•
When set to YES, enables SIREN14 in H.323.
Two flags from the AUDIO PLUS FLAGS section must be set as
follows: PDC_MODE=YES and AUDIO_PLUS_FREQUENCY=WB.
• SIREN7 = YES
When set to YES, enables SIREN7 in H.323.
Section H320_AUDIO
G722_1_320 = YES
•
When set to YES, enables G.722.1 in H.320. Requires Audio card H/W
Version 4.0 or higher, or the Audio+ card.
H320_G722 = YES
•
When set to YES, enables G.722 in H.320. Requires Audio card H/W
Version 4.0 or higher, or the Audio+ card.
• SIREN14_320 = NO
When set to YES, enables SIREN14 in H.320. Requires the Audio+ card.
• SIREN7_320 = YES
When set to YES, enables SIREN14 in H.320. Requires Audio card H/W
Version 4.0 or higher, or the Audio+ card.